Motogadget Motoscope TINY
The motoscope tiny is a very compact, analogue 49 mm speedometer. Speed is digitally measured and precisely displayed via stepping motor and indicator.
The installation diameter of 49 mm and the installation depth of only 24 mm provide various installation options.
Sophisticated technology provides for a classic look without compromise. The dial completely does without display sections or LCD and has a convincing classical look. The ideal solution for purists and minimalists.
Dial and display
If the speed exceeds the 200 km/h on the analogue scale, it is automatically displayed in the LED display. The maximum speed is recorded as well. The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial. These lights are only visible when operated, too.
Default value on the display is the time. If needed, a short actuation of the push-button will display the values of total distance, day trip, on-board voltage etc.
All functions are easy to operate with the push-button, e.g. day trip, reset or the like. Default settings or recorded values are of course stored even with the power supply switched off.
Connection and sensors
The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore easy to hide. The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long). This allows for the easy conversion of an originally mechanical speedometer drive on a motorbike.
The motoscope tiny is compatible with various original speedometer sensors (dry reed contact and proximity sensors) of the motorbike manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.
An intelligent 'Teach Function' allows for the easy calibration of the speedometer - even on vehicles with transmission sensors, e.g. Harley Davidson.
- Instrument with approx. 75 cm connector cable
- Mini push-button
- 2 removable fuses
- 9 cable end connectors
- Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
- 2 powerful neodymium mini magnets
- 2 mounting screws M3 with washer
- 2 diodes for pairing of turn signals
- Detailed installation and operating instructions
Specifications and features
|Mounting diameter||49 mm|
|Weight||approx. 96 g|
|Mount||2 x M3 threaded hole|
|Power consumption, operating||approx. 200 mA (load dependent)|
|Operating voltage||9 V - 15 V|
|Operating temperature||-20°... +80°C|
|Speedometer, analogue (indicator)||0 – 200 km/h or mi/h|
|Speedometer, numeric (LED display)||200 – 999 km/h or mi/h|
|Max. speed||0 – 999 km/h or mi/h|
|On-board voltage||9 – 15 V|
|Clock||00:00 – 23:59|
|Trip meter||0 – 999.9 km or mi|
|Total distance (adjustable)||99999 km or mi max.|
|Indicator lights||turn signal, high beam, neutral, hazard light|